IEC 60502-1 / 60502-2  ·  SWA, Steel Wire & AWA Armoured Cable Manufacturer
ZMS Cable logo
Home / Products / Special Armoured Cables / Mining Armoured Cable
Mining · Flame retardant

Mining Armoured Cable

Flame retardant armoured power cable for underground roadways and open-pit equipment — reinforced sheath, rodent and impact protection.

Rated voltage0.6/1 kV, 3.3 kV on request
ConductorStranded copper, class 2 or 5
InsulationXLPE or PVC, flame retardant
ArmourGalvanised steel wire or tape
Product overview

Construction and performance

Mining cable lives in the worst combination of conditions: abrasive rock, water, constant re-routing, rodent attack and a fire risk that is regulated rather than optional.

Our mining armoured construction uses a reinforced PVC or LSZH sheath over steel wire or tape armour, with flame retardant compounds tested to IEC 60332-3 and, on request, to the fire resistance requirements of the project’s mining standard.

For mobile equipment we supply the flexible armoured variant; for fixed roadways and shaft runs the standard stranded construction. Both can be supplied with an earth conductor sized to the mine’s earthing study.

Key properties

  • Flame retardant compounds to IEC 60332-3
  • Reinforced sheath for abrasion
  • Rodent and impact resistant armour
  • Flexible variant for mobile plant

Technical data

PropertySpecification
Rated voltage0.6/1 kV, 3.3 kV on request
ConductorStranded copper, class 2 or 5
InsulationXLPE or PVC, flame retardant
ArmourGalvanised steel wire or tape
SheathReinforced PVC or LSZH, flame retardant
Flame testIEC 60332-3 (cat. B)
Cross-section1.5 – 300 mm²
StandardIEC 60502-1, IEC 60332-3, project spec
OptionsEarth conductor, flexible construction, armoured pilot cores
PackingDrum, cut to roadway length
Request a Quote
Standards & applications

Built to the standard the project specifies.

Test certificates and type test reports are supplied with the drum documents.

IEC

IEC 60502-1 — Type tested construction

IEC

IEC 60332-3 — Compliance on request

IEC

IEC 60228 — Compliance on request

AS/NZS

AS/NZS 1802 (on request) — Compliance on request

Typical applications

  • Underground roadways and shafts
  • Coal and metal mine fixed plant
  • Open-pit equipment supply
  • Conveyor and pump stations
  • Ventilation and dewatering circuits
Engineering support

Need this cable sized for your route?

Send the laying method, soil conditions and quantity. We confirm armour, sheath and lead time in the quotation.

Request a quotation

Request this cable

Send cores, cross-section, voltage grade and quantity. We will confirm armour type, sheath and lead time.

By sending this form you agree to our privacy policy. We reply within one business day.