


AWA Aluminum Wire Armoured Cable
Non-magnetic aluminium wire armour for single-core and AC circuits — 0.6/1kV, 16 to 630 mm², IEC 60502-1.
Construction and performance
A single-core AC cable with steel armour behaves like the secondary of a transformer: the armour carries induced circulating current, heats up and steadily derates the cable. Aluminium wire armour removes that problem entirely.
The construction is otherwise conventional — copper or aluminium conductor, XLPE or PVC insulation, a bedding layer, a bed of aluminium wires and a PVC, PE or LSZH oversheath — but the armour is non-magnetic, so the current rating stays where the calculation put it.
Use it for single-core feeders, transformer tails, busbar drops and any AC circuit where the armour has to be metallic yet electrically neutral.
Key properties
- No circulating current in the armour
- Full current rating retained on single-core runs
- Mechanical protection with a valid earth path
- Lighter than an equivalent steel wire armour
Technical data
| Property | Specification |
|---|---|
| Rated voltage | 0.6/1 kV (MV grades on request) |
| Conductor | Copper or aluminium, class 2 |
| Insulation | XLPE or PVC |
| Armour | Aluminium wire, non-magnetic |
| Cores | 1 (standard), multicore on request |
| Cross-section | 16 – 630 mm² |
| Oversheath | PVC, PE or LSZH |
| Standard | IEC 60502-1, IEC 60228 |
| Current rating | No armour derating |
| Bending radius | 12 × overall diameter |
| Packing | Drum, cut lengths |
Built to the standard the project specifies.
Test certificates and type test reports are supplied with the drum documents.
IEC
IEC 60502-1 — Type tested construction
IEC
IEC 60228 — Compliance on request
IEC
IEC 60332-1-2 — Compliance on request
Typical applications
- Single-core AC feeders
- Transformer and switchgear tails
- Busbar and riser connections
- Duct and trench routes with mechanical risk
- Earthing-conscious designs
Drums planned against the container.
Drum marking, cable print and drum size are confirmed against your project reference before production.
Drums of 500 m and 1000 m as standard, or cut to your bill of quantities. Drum marking, cable print and drum size are confirmed against your project reference and the container plan before production.
- 500 m and 1000 m drums as standard
- Cut lengths to bill of quantities
- Drum marking to project reference
- FOB, CIF or DAP terms
Other constructions for the same project.
Compare armour type, sheath and voltage grade before you specify.

SWA LV Power Cable
0.6/1kV steel tape armoured PVC or XLPE power cable for direct burial — 1 to 5 cores, 1.5 to 630 mm², IEC 60502-1 and…
View details →
Steel Wire Armoured MV
6/10kV to 18/30kV XLPE insulated steel wire armoured cable with copper tape screen — for buried MV feeders and vertical…
View details →
Armoured Shielded Control
450/750V screened and armoured control cable, 2 to 61 cores, tinned copper braid plus steel wire armour for noisy plant…
View details →Need this cable sized for your route?
Send the laying method, soil conditions and quantity. We confirm armour, sheath and lead time in the quotation.
Request this cable
Send cores, cross-section, voltage grade and quantity. We will confirm armour type, sheath and lead time.
