


SWA Steel Tape Armoured LV Power Cable
0.6/1kV steel tape armoured PVC or XLPE power cable for direct burial — 1 to 5 cores, 1.5 to 630 mm², IEC 60502-1 and BS 6346.
Construction and performance
The standard buried LV distribution cable. Copper or aluminium conductors, PVC or XLPE insulation, a galvanised steel tape armour and a PVC oversheath — the construction that most municipal, industrial and building projects specify by default.
The two steel tapes overlap by at least 20% and are applied with a controlled lay length, so the armour stays continuous through bending and pulling. The inner sheath between insulation and armour prevents galvanic contact and keeps the armour as a clean, predictable earth path.
Supplied on 500 m or 1000 m drums, or cut to your bill of quantities with cable marking to your project reference.
Key properties
- Continuous metallic earth path through the armour
- Resists rodent attack and point loads
- Suitable for direct burial without additional protection
- Available in LSZH for tunnels and basements
Technical data
| Property | Specification |
|---|---|
| Rated voltage | 0.6/1 kV |
| Conductor | Class 1 or 2 copper, or aluminium |
| Insulation | PVC (70 °C) or XLPE (90 °C) |
| Cores | 1, 2, 3, 3+1, 4, 4+1, 5 |
| Cross-section | 1.5 – 630 mm² |
| Armour | Galvanised steel tape (STA / SWA) |
| Inner sheath | PVC or PE |
| Oversheath | PVC, PE or LSZH |
| Standard | IEC 60502-1, BS 6346 |
| Flame test | IEC 60332-1-2 |
| Bending radius | 12 × overall diameter |
| Packing | 500 m / 1000 m drum, cut lengths |
Built to the standard the project specifies.
Test certificates and type test reports are supplied with the drum documents.
IEC
IEC 60502-1 — Type tested construction
BS
BS 6346 — Compliance on request
IEC
IEC 60228 (conductors) — Compliance on request
IEC
IEC 60332-1-2 — Compliance on request
Typical applications
- Direct burial in trenches and ducts
- Industrial plant power distribution
- Building sub-mains and risers
- Municipal and road lighting feeders
- Pump and motor supplies
Drums planned against the container.
Drum marking, cable print and drum size are confirmed against your project reference before production.
Drums of 500 m and 1000 m as standard, or cut to your bill of quantities. Drum marking, cable print and drum size are confirmed against your project reference and the container plan before production.
- 500 m and 1000 m drums as standard
- Cut lengths to bill of quantities
- Drum marking to project reference
- FOB, CIF or DAP terms
Other constructions for the same project.
Compare armour type, sheath and voltage grade before you specify.

Steel Wire Armoured MV
6/10kV to 18/30kV XLPE insulated steel wire armoured cable with copper tape screen — for buried MV feeders and vertical…
View details →
AWA Armoured Cable
Non-magnetic aluminium wire armour for single-core and AC circuits — 0.6/1kV, 16 to 630 mm², IEC 60502-1.
View details →
Armoured Shielded Control
450/750V screened and armoured control cable, 2 to 61 cores, tinned copper braid plus steel wire armour for noisy plant…
View details →Need this cable sized for your route?
Send the laying method, soil conditions and quantity. We confirm armour, sheath and lead time in the quotation.
Request this cable
Send cores, cross-section, voltage grade and quantity. We will confirm armour type, sheath and lead time.
