


Steel Wire Armoured MV Cable
6/10kV to 18/30kV XLPE insulated steel wire armoured cable with copper tape screen — for buried MV feeders and vertical risers.
Construction and performance
Medium voltage feeders need three things a LV cable does not: a metallic screen to control the electric field, thicker insulation, and — on buried or vertical routes — armour strong enough to carry the pull and resist impact.
This cable combines all three. XLPE insulation over a class 2 stranded conductor, a copper tape metallic screen with overlapping laps, a bedding layer, a bed of galvanised steel wires and a PVC or PE oversheath.
The steel wire bed handles tensile load on vertical drops and long pulls and adds earth-fault capacity. Where single-core construction is required, we supply the non-magnetic AWA version instead.
Key properties
- Copper tape screen with controlled field grading
- Steel wire bed for tensile and impact duty
- Partial discharge tested on every drum
- LSZH option for tunnels and indoor substations
Technical data
| Property | Specification |
|---|---|
| Rated voltage | 6/10, 8.7/15, 12/20, 18/30 kV |
| Conductor | Class 2 copper or aluminium |
| Insulation | XLPE, 3.4 – 8.0 mm depending on grade |
| Screen | Copper tape, overlapped |
| Armour | Galvanised steel wire (SWA) |
| Oversheath | PVC, PE or LSZH |
| Cross-section | 25 – 400 mm² |
| Standard | IEC 60502-2, BS 5467 / BS 7835 |
| Partial discharge | ≤ 5 pC at 1.73 U0 |
| Voltage test | 3.5 U0, 5 min |
| Bending radius | 15 × overall diameter |
| Packing | Drum, cut lengths to route |
Built to the standard the project specifies.
Test certificates and type test reports are supplied with the drum documents.
IEC
IEC 60502-2 — Type tested construction
BS
BS 5467 — Compliance on request
BS
BS 7835 (LSZH) — Compliance on request
IEC
IEC 60228 — Compliance on request
Typical applications
- Buried MV distribution feeders
- Ring main units and substation interconnectors
- Vertical risers and shaft drops
- Wind farm and industrial park collection
- River, bridge and jetty crossings
Drums planned against the container.
Drum marking, cable print and drum size are confirmed against your project reference before production.
Drums of 500 m and 1000 m as standard, or cut to your bill of quantities. Drum marking, cable print and drum size are confirmed against your project reference and the container plan before production.
- 500 m and 1000 m drums as standard
- Cut lengths to bill of quantities
- Drum marking to project reference
- FOB, CIF or DAP terms
Other constructions for the same project.
Compare armour type, sheath and voltage grade before you specify.

SWA LV Power Cable
0.6/1kV steel tape armoured PVC or XLPE power cable for direct burial — 1 to 5 cores, 1.5 to 630 mm², IEC 60502-1 and…
View details →
AWA Armoured Cable
Non-magnetic aluminium wire armour for single-core and AC circuits — 0.6/1kV, 16 to 630 mm², IEC 60502-1.
View details →
Armoured Shielded Control
450/750V screened and armoured control cable, 2 to 61 cores, tinned copper braid plus steel wire armour for noisy plant…
View details →Need this cable sized for your route?
Send the laying method, soil conditions and quantity. We confirm armour, sheath and lead time in the quotation.
Request this cable
Send cores, cross-section, voltage grade and quantity. We will confirm armour type, sheath and lead time.
