


Mining Armoured Cable
Flame retardant armoured power cable for underground roadways and open-pit equipment — reinforced sheath, rodent and impact protection.
Construction and performance
Mining cable lives in the worst combination of conditions: abrasive rock, water, constant re-routing, rodent attack and a fire risk that is regulated rather than optional.
Our mining armoured construction uses a reinforced PVC or LSZH sheath over steel wire or tape armour, with flame retardant compounds tested to IEC 60332-3 and, on request, to the fire resistance requirements of the project’s mining standard.
For mobile equipment we supply the flexible armoured variant; for fixed roadways and shaft runs the standard stranded construction. Both can be supplied with an earth conductor sized to the mine’s earthing study.
Key properties
- Flame retardant compounds to IEC 60332-3
- Reinforced sheath for abrasion
- Rodent and impact resistant armour
- Flexible variant for mobile plant
Technical data
| Property | Specification |
|---|---|
| Rated voltage | 0.6/1 kV, 3.3 kV on request |
| Conductor | Stranded copper, class 2 or 5 |
| Insulation | XLPE or PVC, flame retardant |
| Armour | Galvanised steel wire or tape |
| Sheath | Reinforced PVC or LSZH, flame retardant |
| Flame test | IEC 60332-3 (cat. B) |
| Cross-section | 1.5 – 300 mm² |
| Standard | IEC 60502-1, IEC 60332-3, project spec |
| Options | Earth conductor, flexible construction, armoured pilot cores |
| Packing | Drum, cut to roadway length |
Built to the standard the project specifies.
Test certificates and type test reports are supplied with the drum documents.
IEC
IEC 60502-1 — Type tested construction
IEC
IEC 60332-3 — Compliance on request
IEC
IEC 60228 — Compliance on request
AS/NZS
AS/NZS 1802 (on request) — Compliance on request
Typical applications
- Underground roadways and shafts
- Coal and metal mine fixed plant
- Open-pit equipment supply
- Conveyor and pump stations
- Ventilation and dewatering circuits
Drums planned against the container.
Drum marking, cable print and drum size are confirmed against your project reference before production.
Drums of 500 m and 1000 m as standard, or cut to your bill of quantities. Drum marking, cable print and drum size are confirmed against your project reference and the container plan before production.
- 500 m and 1000 m drums as standard
- Cut lengths to bill of quantities
- Drum marking to project reference
- FOB, CIF or DAP terms
Other constructions for the same project.
Compare armour type, sheath and voltage grade before you specify.

SWA LV Power Cable
0.6/1kV steel tape armoured PVC or XLPE power cable for direct burial — 1 to 5 cores, 1.5 to 630 mm², IEC 60502-1 and…
View details →
Steel Wire Armoured MV
6/10kV to 18/30kV XLPE insulated steel wire armoured cable with copper tape screen — for buried MV feeders and vertical…
View details →
AWA Armoured Cable
Non-magnetic aluminium wire armour for single-core and AC circuits — 0.6/1kV, 16 to 630 mm², IEC 60502-1.
View details →Need this cable sized for your route?
Send the laying method, soil conditions and quantity. We confirm armour, sheath and lead time in the quotation.
Request this cable
Send cores, cross-section, voltage grade and quantity. We will confirm armour type, sheath and lead time.
