


Armoured Shielded Control Cable
450/750V screened and armoured control cable, 2 to 61 cores, tinned copper braid plus steel wire armour for noisy plant environments.
Construction and performance
Two protections in one cable: a tinned copper braid that keeps VFD noise and switching transients out of the signal, and a steel wire armour that keeps forklifts, rodents and sharp tray edges out of the cable.
The screen is applied over the assembled cores with a drain wire, coverage of 85% as standard (up to 95% on request). The armour sits outside the bedding, so screen and armour remain electrically separate — useful when the screen is earthed at one end only.
Numbered cores, colour code to IEC 60227 / HD 308, and paired or tripled constructions with individual plus overall screens for analogue and RTD circuits.
Key properties
- Braid screen and armour kept electrically separate
- 85–95% screen coverage
- Numbered cores for fast termination
- Paired/triple constructions available
Technical data
| Property | Specification |
|---|---|
| Rated voltage | 450/750 V |
| Conductor | Class 5 flexible or class 2 stranded copper |
| Insulation | PVC or XLPE |
| Cores | 2 – 61 |
| Cross-section | 0.5 – 2.5 mm² (up to 10 mm² on request) |
| Screen | Tinned copper braid, 85% coverage (95% on request) |
| Armour | Galvanised steel wire or steel tape |
| Sheath | PVC or LSZH |
| Standard | IEC 60227, IEC 60228, IEC 60332-1-2 |
| Core identification | Numbered, HD 308 colour code |
| Bending radius | 10 × overall diameter |
Built to the standard the project specifies.
Test certificates and type test reports are supplied with the drum documents.
IEC
IEC 60227 — Compliance on request
IEC
IEC 60228 — Compliance on request
IEC
IEC 60332-1-2 — Compliance on request
HD
HD 308 (core colours) — Compliance on request
Typical applications
- PLC and DCS I/O wiring
- VFD and motor control circuits
- Instrument and RTD signal runs
- Substation and switchgear control
- Tray and duct routes in heavy plant
Drums planned against the container.
Drum marking, cable print and drum size are confirmed against your project reference before production.
Drums of 500 m and 1000 m as standard, or cut to your bill of quantities. Drum marking, cable print and drum size are confirmed against your project reference and the container plan before production.
- 500 m and 1000 m drums as standard
- Cut lengths to bill of quantities
- Drum marking to project reference
- FOB, CIF or DAP terms
Other constructions for the same project.
Compare armour type, sheath and voltage grade before you specify.

SWA LV Power Cable
0.6/1kV steel tape armoured PVC or XLPE power cable for direct burial — 1 to 5 cores, 1.5 to 630 mm², IEC 60502-1 and…
View details →
Steel Wire Armoured MV
6/10kV to 18/30kV XLPE insulated steel wire armoured cable with copper tape screen — for buried MV feeders and vertical…
View details →
AWA Armoured Cable
Non-magnetic aluminium wire armour for single-core and AC circuits — 0.6/1kV, 16 to 630 mm², IEC 60502-1.
View details →Need this cable sized for your route?
Send the laying method, soil conditions and quantity. We confirm armour, sheath and lead time in the quotation.
Request this cable
Send cores, cross-section, voltage grade and quantity. We will confirm armour type, sheath and lead time.
