IEC 60502-1 / 60502-2  ·  SWA, Steel Wire & AWA Armoured Cable Manufacturer
ZMS Cable logo
Home / Products / AWA Aluminum Wire Armoured Cables / AWA Aluminum Wire Armoured Cable
0.6/1 kV · Non-magnetic AWA

AWA Aluminum Wire Armoured Cable

Non-magnetic aluminium wire armour for single-core and AC circuits — 0.6/1kV, 16 to 630 mm², IEC 60502-1.

Rated voltage0.6/1 kV (MV grades on request)
ConductorCopper or aluminium, class 2
InsulationXLPE or PVC
ArmourAluminium wire, non-magnetic
Product overview

Construction and performance

A single-core AC cable with steel armour behaves like the secondary of a transformer: the armour carries induced circulating current, heats up and steadily derates the cable. Aluminium wire armour removes that problem entirely.

The construction is otherwise conventional — copper or aluminium conductor, XLPE or PVC insulation, a bedding layer, a bed of aluminium wires and a PVC, PE or LSZH oversheath — but the armour is non-magnetic, so the current rating stays where the calculation put it.

Use it for single-core feeders, transformer tails, busbar drops and any AC circuit where the armour has to be metallic yet electrically neutral.

Key properties

  • No circulating current in the armour
  • Full current rating retained on single-core runs
  • Mechanical protection with a valid earth path
  • Lighter than an equivalent steel wire armour

Technical data

PropertySpecification
Rated voltage0.6/1 kV (MV grades on request)
ConductorCopper or aluminium, class 2
InsulationXLPE or PVC
ArmourAluminium wire, non-magnetic
Cores1 (standard), multicore on request
Cross-section16 – 630 mm²
OversheathPVC, PE or LSZH
StandardIEC 60502-1, IEC 60228
Current ratingNo armour derating
Bending radius12 × overall diameter
PackingDrum, cut lengths
Request a Quote
Standards & applications

Built to the standard the project specifies.

Test certificates and type test reports are supplied with the drum documents.

IEC

IEC 60502-1 — Type tested construction

IEC

IEC 60228 — Compliance on request

IEC

IEC 60332-1-2 — Compliance on request

Typical applications

  • Single-core AC feeders
  • Transformer and switchgear tails
  • Busbar and riser connections
  • Duct and trench routes with mechanical risk
  • Earthing-conscious designs
Engineering support

Need this cable sized for your route?

Send the laying method, soil conditions and quantity. We confirm armour, sheath and lead time in the quotation.

Request a quotation

Request this cable

Send cores, cross-section, voltage grade and quantity. We will confirm armour type, sheath and lead time.

By sending this form you agree to our privacy policy. We reply within one business day.